UBB.Developers Forums UBB.classic V5 Mod Questions *Last Username To Post* in forumdisplay.cgi

Well a lot of people have asked for this hack, and while some had problems installing it, most seem to have it working fine. I wrote the code for 5.39b, but it should work on later versions with minimal or no changes. I've created a text file with the directions, follow the CAREFULLY as this hack can get very involved and confusing if you don't watch what you're doing. As always, remember to back-up your files first!
http://www.vhlinks.com/pages/lastusername.txt

------------------
Webmaster Van Halen Links.com
http://www.vhlinks.com
UBB Moderator
http://www.scriptkeeper.com/cgi-bin/Ultimate.cgi

How does this differ from your hack that you posted here?
http://www.scriptkeeper.com/ubb/Forum14/HTML/002770.html

------------------
When you sin, you don't fall FROM God's grace, you fall INTO it!!

I looks like he just converted it into a text file.

------------------
President and Webmaster of UBB Hackers Hideout.

ICQ: 33326211
AIM:SpazJCC
Email: ubbmaster@ubbcodehacking.com

Thanks, Slurpee. This post will be much easier to find, I think.

Incidentally, after uploading the changes, I didn't think it was working for me. I updated threads, reindexed and the username doesn't show up for prior posts. New posts, on the other hand, do.

------------------
It is easy in the world to live after the world's opinions;
it is easy in solitude to live after one's own.
But the great man is he who in the midst of the crowd
keeps with perfect sweetness the independence of solitude.

-- Emerson

Are you sure it has replys after the post. If not then you have to post a reply to get it to work.

------------------
President and Webmaster of UBB Hackers Hideout.

ICQ: 33326211
AIM:SpazJCC
Email: ubbmaster@ubbcodehacking.com

Yes. In fact, one of them has 15.

--------

Update: If you have this problem, you may need to set General Settings with update thread count/time turned on more than once. That seems to be all it was.

Txs, again, Slurpee!

Slurpee, I have a question. I'm using the latest version of your hack, and as far as the first few threads on the forumdisplay page are concerned, the link to post option works just fine.

Down the list, however, nos. are being added to the filename as if there were more than one page to the thread. For example: At http://www.babygiftset.com/cgi-bin/...on=topics&forum=Anything+Goes!&number=20 the link to cali's post on the top thread is fine. But the link to Sarah H's (and all thereafter) have the extra number (000043-3.html#Sarah+H02-01-200012:27 PM). As the posts move down, this number is added, increasing by an integer of 1. So only the first few link to the post correctly.

Can you help me with this? I've triple-checked the code. Someone else is having this problem as well ( http://www.scriptkeeper.com/ubb/Forum22/HTML/002448.html ). But things seem to get lost much easier on Scriptkeeper's forums.

Hate to say it but....Ditto http://www.mrcs.net/board/mrcubb/cgi-bin/Ultimate.cgi?action=intro
First 2 are fine after that its a file not found

Hmmm....guys try changing this line in forumdisplay.cgi:

if ($thesetotal > 0) {

to

if ($thesetotal > 1) {

See what happens.

------------------
Webmaster Van Halen Links.com
http://www.vhlinks.com
UBB Moderator
http://www.scriptkeeper.com/cgi-bin/Ultimate.cgi

Nope....hmmmm


The link that works:http://www.mrcs.net/board/mrcubb/ubb/Forum1/HTML/000119.html#kec95February 02, 200012:07 AM

The ones that dont: http://www.mrcs.net/board/mrcubb/ubb/Forum1/HTML/000117-2.html#PhixionFebruary 01, 200008:50 PM

Btw..The change made the first one not link...
Oh well I guess it wont work on 5.43?
Great hack though,Cant wait to get the bugs out

for (my $i=2; $i< $thesetotal; $i++){

Changed this to:

for (my $i=20; $i< $thesetotal; $i++){

in forumdisplay.cgi
And it now works To guess what ???the 20th thread

One evil issue though.....
If the threads are more than one page, Its killing the cpu looking for the last post...

Same here. *Sigh* Oh, well. I've unlinked the name for the time being. But this would be a cool trick, if I could figure out how to get it working.

Great hack. It should be included in the next version of the board.

You ever get it Chan?

------------------
SalaTar Admin of
www.mrcs.net
Home of the free Linux Box

I am having the same problem, just the first 2 posts are working fine but than it add the extra integer by 1 in every post and than quit working. Has anyone figure this out yet
The Rock

Come on people, someone can answer and make this version bug free. Thanks
The Rock

I can not beleive this. This forum itself is using this and no one is telling me the fix for this code

I think exactly as TheRock....

this version doesn`t work for ubb 5.44a but this board itself has ist... so please post the code here.....

thx

I added this hack, under the assumption that I am better than everyone else and it would work magically(just kidding)! Well, I have the same problem as everyone else.

So, any idea what is wrong?

------------------
Troy(Trekkan)
RPG-Files Webmaster & Owner
http://www.rpg-files.com

Slurpee -

I am trying to add this hack but in ubb-libary you are calling to find chomp($checkit[7]);. but in my copy version 5.38c. I don't have any thing like that.

This is where I stopped just due to this.

Please help.

Jerry

What´s about this hack in later ubb versions? It don´t work in privat areas.

Well i just wanted to say i upgraded to 5.44b
and put this hack in with no problems. I have it linked to the profile. That may make a differenceas to why people are having problems. Wanted to say thanks for the hardwork of making this hack.

Matt

I am using 5.44a, without the profile linking. No luck...

------------------
Troy(Trekkan)
RPG-Files Webmaster & Owner
http://www.rpg-files.com

how do you make it work in private forums?

I'm using this hack in 5.43d (taken from the database) and it works fine. My advice for those of you who can't get it to work is: Try reinstalling it.

Just a thought

problem, when i try to update threads in the general variables area and check that option you say to check it wont go through the process of updating the threads, it goes to forum 1 them goes to a blank page next. I don't understand what is wrong at all.

Still looking for help on installing this in version 5.38c.

I do not have the line chomp($checkit[7]);
but what I have is:
if ($checkit[6] =~ /N/) {
$AddN = "N";
} else {
$AddN = "";
}
if ($checkit[1] eq "$threadnum") {
if ($openclose eq "open") {
$checkit[6] = "$AddN";
} else {
$checkit[6] = "X$AddN";
}
$newline = join("|^|", @checkit);
push(@theupdatedts, $newline);
} else {
push(@theupdatedts, $checkthis);
}
} # end foreach @threadsum

Could someone help with this?

hunter

I feel so cool. I got this hack to work the first time (well, after i remembered to change the permissions on the files after uploading them). Thanks for a great hack with easy instructions.

Okay since no help has been forth coming I have been playing around with it myself.

below
foreach $checkthis(@threadsum) {
chomp($checkthis);

I added the chomp($checkit[8]);

But changed it to chomp($checkit[7]);

then in in forumdisplay I changed:
$lastAuthName = qq( );
$lastName = $threadinfo[8];
$lastName =~ tr/+/ /;

to
$lastAuthName = qq( );
$lastName = $threadinfo[7];
$lastName =~ tr/+/ /;

It's working.

hunter

Hmmm...just noticed something - dont know if its a problem or not. I have the last user to post listed for each topic, which is great - that's working, along with the link to the post.. However. Last user to post is NOT displaying for the forums as a whole (on the main page). Did I do something wrong, or is that a different hack completely?

Mikal that a different hack that you can find at http://ubbcodehacking.com/ubb/Forum7/HTML/000007.html.

hunter

Cool - I love to hear i didnt get anything wrong - BUT, that url doesnt work - how about a name for the hack so i know what to search for? - Thanks.

try the link again it works.

hunter

Anyone get this to work with 5.45b???

I see it's up with this forum but having all kinds of things disappear on me when I tried to implement the original message.

For instance, after the 2nd post, it stopped tracking who the last one was. I also lost the total posts, and origin of the poster (set in General Settings) when one posts a new post or a reply.

I saw a lot of questions but no one seems to answer. I know it's doable but would appreciate any help.

I too had the same problem, i had to have cal help me with my ubb_library2.pl to get it back to normal, thats where it screws something up. Im not sure this works for the latest 5.45b. It possibly does, but unless you know perl pretty good you wont be able to tell what your doing wronge

Lots of hacks are not compatible with 5.4.5 because of the way it handles profile fields. In time they should all be updated/fixed.

Just a thought

Took a while to hack in, but works well in v5.45b using Slurpee's directions . I didn't do anything different than he says.

------------------
Allen

- http://www.stand318.com

No kidding?

Ok... let me get rid of Mutt's UBB Code Buttons and see what happens.

Excellent Hack Slurpee!

Just put it into 5.44 using profile linking without a hitch per your instructions!

-twice

Okee dokee. Two things. For one, it didn't work with Mutt's UBB Code Button hack (like it works on this forum) and I did have a problem with one of Slurpee's instruction.

When he says to edit the forumdisplay file (for profile link)

In the subroutine TopicGutsHTML
Look for this code:
$ThisURL = qq($NonCGIURL/$ExactPath/HTML/$threadinfo[1].html);

Below it add the following:
$lastAuthName = qq(target=_blank> );
$lastName = $threadinfo[8];
$lastName =~ tr/+/ /;

That part has a white space that was giving me headaches. Deleting that white space fixed my problem...

Just a though... OOPS! Sorry Cal!!!

It worked right when I installed it on all existing posts (after I re-built by doing the re-count/update threads), but when someone posts, it ends up being blank where their name should be! Check this out... any pointers would be much obliged!

Example

**UPDATE - Not only that but users can no longer post new topics! Replies work but new topics don't! I'm gonna have to back this one out.

-twice

I would re-do the hack. Try it a few times. It's the only way to know that it's not your syntax. Make sure all of your statements end with a semicolon and all of the variables have either a $ or @ in front of it (% is not being used in the changes from what I can tell).

Also, take a look at the HTML and make sure no whitespace where it would screw things up.

PrimeTime, you were right! I missed an edit the first time. Kudos to you, Slurpee, it works great now!

-twice

Last UserName to Post

now work with privats / multipagehack
UBB 5.45x

greetings from gErMaNy!

does it work?

ok, seeing that this is in the "finished hacks" sure is misleading.. IS this thing finished?

As you can see, none of the hacks is a real "final". There is always something to optimize
This hack occupied us for several weeks. There are two versions right now:

• The first variation shows the last user and you can get into his profile with a click. This hack is also used here.
• The second variant leads us to the subscription of the last user in the covered thread.
  And this is where our problem appears: there is no support for private forums with more than one page. because of that I build in the routine for that. what happened now was that every post that should still appear on the "old" page was linked to the new, and this was the same with every setting. To be short: something was totally wrong. I removed this bug so that the hack should be a "real" final now. hehe.

the change is very small and applies to Slurpee's original-routine in "forumdisplay.cgi" only, so this is the only thing you need exchanged.

##Slurpee's Last Username Hack for Thread Link
$replies = $threadinfo[3];
$totalposts = $replies;
$lastpage = "";
$thesepages = $totalposts / $HTMLDisplayMax;
my ($thesetotal,$remainder) = split(/./,$thesepages);
$thesetotal = $thesetotal+2;
$lastpage = "$ThisURL";
if ($PrivateMax eq "yes") {
for (my $i=2; $i< $thesetotal ; $i++){
$lastpage = "$CGIURL/forumdisplay.cgi?action=displayprivate&number=$number&topic=$threadinfo[1]-$i";
}
} else {
for (my $i=2; $i< $thesetotal ; $i++){
$lastpage = "$NonCGIURL/$ExactPath/HTML/$threadinfo[1]-$i.html";
}
}
$lastName = $threadinfo[8];
$lastName =~ tr/+/ /;
if ($replies >= 1) {
$lastAuthName = qq( by
$lastName );
}
else {
$lastAuthName = "";
}
##############


but just because it works perfectly for me it does not have to work for everyone else Thats the reason for my question.

I don't know guys, I had a couple private forum topics longer than one page and it worked fine, so I don't know what to say.


------------------
Webmaster Van Halen Links.com
http://www.vhlinks.com
UBB Moderator
http://www.scriptkeeper.com/cgi-bin/Ultimate.cgi

Is there a FINAL complete hack?
In my case, when I completed the hack, it worked fine when someone posted a new topic...when they made a reply to a thread, the whole thread would disappear from the list!

If the final hack is out there, can someone please post it with instructions...

Thanks...

Tony

I installed the hack that AA had posted a while back that supposably displays the "last reply by" in the private section, it didnt work =(, and sometimes i will get:

Last Reply By: 0

instead of

Last Reply By: Username

can someone help me out here?

Yes, I had this problem too. There is an error in the code. I emailed the fix to Slurpee last night. But here it is for you all.

open forumdisplay.cgi

Scan for Slurpee And replace that section with the following.


++Russ


[This message has been edited by repstein on June 15, 2000]

Well I fixed it myself, well at least the problem with the private forums, I dont exactly know what you did there repstien, but i didnt need to do that...

if ($PrivateMax eq "yes") {
$ThisURL = qq($CGIURL/forumdisplay.cgi?action=displayprivate&number=$number&topic=$threadinfo[1]);
} else {
$ThisURL = qq($NonCGIURL/$ExactPath/HTML/$threadinfo[1].html);
}
$replies = $threadinfo[3];
$totalposts = $replies;
$lastpage = "";
$thesepages = $totalposts / $HTMLDisplayMax;
my ($thesetotal,$remainder) = split(/./,$thesepages);
$thesetotal = $thesetotal+2;
$lastpage = "$ThisURL";
if ($PrivateMax eq "yes") {
for (my $i=20; $i< $thesetotal ; $i++) {
$lastpage = "$CGIURL/forumdisplay.cgi?action=displayprivate&number=$number&topic=$threadinfo[1]-$i";
}
} else {
for (my $i=20; $i< $thesetotal ; $i++) {
$lastpage = "$NonCGIURL/$ExactPath/HTML/$threadinfo[1]-$i.html";
}
}
$lastName = $threadinfo[8];
$lastName =~ tr/+/ /;
if ($replies >= 1) {
$lastAuthName = qq(
last reply by:$lastName );
}
else {
$lastAuthName = "";
}

so far the newer posts have been working, but i still don't know why i got that last reply by: 0 thing... must of been a fluke..

but this little code up there let's the private forums show "last reply by: "


------------------

Repstein,

Thank you very much for this update to Slurpee's code. This fixed the problem I was having with the "Actual Post Linking" option.

------------------
Steve
OptiBoard Discussion Forums

File has been updated in the database:

click here

------------------
Allen

- http://www.stand318.com

i installed slurpee's hack exactly as it should be , but the last post doesn't show , i get no errors or anything but it just don't show , what could be wrong with that ? is it my ubb version ?( 5.47c ) its leaving me clueless .

iowan.

...you're using the wrong one...I updated this file, look for "Latest reply by in forumdisplay.cgi" I offer pretty much full support for mine..

------------------

Ok then..how do I change the hack from the link to profile, to link to last post in thread??? Please tell me, please! Someone email me the hack?

It says In the readme there is two options: link to profile and link to Thread poster.

I just installed the version of this hack that is in the UBBDev database, and it's working great. My only question is how do you get the username link to point to the user's profile rather than the thread he replied to?

The only info about this hack is in one text file, and it doesn't say anything about switching between "profile" to "thread" link modes.

Thanks in advance to anyone that could clear this up for me.

Hi again neuro!!

Again, my 2 cents says to leave it as a navigation aid instead of a link to the profile. I'll go out on a limb and say that MOST users want to get to the most recent POST before they want to know WHO posted it. Once there, they can always get the profile of the poster.

Again, just my 2 cents...but IMVVVHO it is USELESS with a link to the poster's profile.

To answer your question, though, I'll have to revisit the docs and get back to you.

Thanks Vipermad, that's really a good point about leaving the links as navigational aids. Made me wonder "what the heck was I thinking?" to want to change it in the first place.

Unfortunately there was more than one problem with the way this modification worked on my board, and I decided that I would just remove it. I found that some usernames are rather long, and having to display them in the "last post" table threw off the other fields to the extent that in some forums the "last post" field was longer than the subject field. It just didn't look aesthetically pleasing to me.

Also, for some reason when you click on the username link, rather than take you to the user's final post in the thread it took you to the beginning of the thread. Not sure why. Anyway, I just figured the negatives outweighed the positives so I said adios to the hack.

Thanks again for all your repeated help and insight, Vipermad. You rule.

Yeah what you should do is if you don't want the long usernames just edit the Maximum charecters allowed in a username. The deafault is 25 so something like 15 won't hurt the tables tooo much.

Good idea there Lord...but once the board is up and has a bunch of users it might be too late. Good thing to possibly add into the archives for new 5.xx users (yes, I think there are MANY who prefer a 5.xx board over 6 ).

Neuro, you are correct. I have done extensive testing with max length usernames, and it IS something that can be annoying. What I did on one board was I modified the text, and the layout of the "last post by....." so it was much shorter and didn't affect the cell width as much.

If I was starting over, I would combine what I have already done, with Lord's idea, for a much happier place!!

I'm revisiting this hack and since I just can not get the link to the "last user to post" to go to that user's last post (it just goes to the top of the thread and you still have to scroll down to get to the last post), I'm once again considering having it link to the user's profile instead. It says in the hack database description:

I don't see that option, can anyone shed some light on this? I suspect I may have to change something in:

if ($replies >= 1) {
$lastAuthName = qq(
Latest reply by: $lastpage#$threadinfo[3]">$lastName );
} else {
$lastAuthName = "";
}

But I'm not sure exactly what.

The link to the instructions is here, if anyone is interested in looking into it for me:

https://www.ubbdev.com/hacks/latestreplybyinforumdisplay.txt

Thanks in advance. I'm sure that there will be some future users that will be interested in this option as well.

Guys.. i really need this mod for my 5.47e version, but the link no longer works.. can anyone tell me how I can add author name to the summary of last posts to the forums??

thanks!

Sorry guys! I just saw the last post, missed that before.. thanks! all sorted.

Anyone know where this elusive option is?

Download "Last post in Ultimate.cgi" from the v5 Database.

Indeed dude...
I trying to collect all the 5.xx series hacks, so people don't keep on gettin broken links

Yeah. There are also alot of hacks missing from UBBDev's database. SpAwN's database (when it was up) had 140 V5 Hacks.

Is spawn's ever going back up ?
If not, can someone lemme know where I can get a hold of all the hacks..
I'll make a little site for 'em

It was up but it went down because Piratecove switched servers and he has to wait for SpAwN to move the files.

ohh..
Is he still around ?